Joist Hanger
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection.
Material： DX51D-Z275/G300-Z275
Process： Stamping/Punching/Bending
Size： Can be customized
Surface： Galvanized sheet
Type： Wood connector
Quality： MOQ 2000pcs
Packaging： General standard export packing/Accept customized packaging
Specifications
Joist Hangers
0.91mm G300 Z275 / DX51D-Z275 Galvanised Steel
Joist Hanger 47 x 90
Designed for use where gauged timber of 47mm width and up to 150mm deep.
Joist Hanger 47 x 120
Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.
Joist Hanger 47 x 190
Used for gauged 47mm thick timber up to 300mm deep.
Joist Hanger 70 x 180
A special size joist hanger designed for gauged 69mm wide timbers.
Joist Hanger 95 x 165
For use on gauged 94mm wide timber or double joists/trusses.
Note: Joist Hangers 52mm wide also available for rough sawn timber.
All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.
NOTE: Our factory provide custom processing services, can be produced according to customer's drawings.
